Posts Tagged ‘Craft’

Morning everyone!

A lot of you have written saying you have lots of earrings but no way to store them all. I like to display my earrings because they’re pretty so this is what I’ve come up with ^_^

Continuing my theme of sweets related storage solutions it’s a gigantic hanging heart made of whipped cream It can hold as many earrings as you want and it doesn’t matter what type of backs the earring have because they can all just poke through the tulle.

So let’s get crafting!

What you need:

• An old wire coat hanger
• Pliers
• Tulle in whatever colour you want
• Artists Modelling Paste
• Piping bag and tip
• Ribbon
• Glue gun
• Needle and thread
• Tray to do it all in so you don’t make a mess

Firstly you should take your coat and use the pliers to undo the top twisty bit.

Use the pliers to shape it into a heart. Use the twisty ends to secure it together. You can make the heart as big or as small as you need, it just depends on how many earrings you want to hang at the end ^_^

Cut out a piece of tulle which is big enough to cover your heart with a few inches either side for hems.

Thread your needle with the same colour as your tulle. Fold the tulle over the sides of the wire and sew in place. You might want to pin it all before you start sewing. You should make sure to sew it quite tightly, if it doesn’t have tension it won’t be able to hold up earrings.

You should stitch like this:

Keep going around to the other side:

Make sure to pay extra attention to the pointy bit at the top of the heart. You might need to cut the tulle a bit to make it fit.

Cut off all the extra tulle around the edges.

Now time for some whipped cream Put your heart onto the tray. At this point you should make sure the heart sits flat on the floor, if it’s not flat it won’t sit against the wall. You might want to put some cling wrap down on the tray to make it easy to remove later.

Get your modelling paste and icing bag ready. You can buy modelling paste from most art stores.

I got the idea to use modelling paste rather than silicone etc from Hikaria who is the master of making sweets! Modeling paste will be more durable for a wall hanging, keep it’s shape well and doesn’t have the safety issues that silicone does.

Use a spoon to fill your piping bag with the paste.

Eventually we are going to make 3 rows of little icing swirls but we want the top ones to be much higher than the sides so we need to make an icing platform for it to sit on! Use your piping bag to make a line around the edge of the heart, you should put it directly on top of the wire.

It doesn’t matter if it looks terrible or is broken up because we’re going to cover the whole thing up with more icing later

Put a bit of extra icing at both of the points of the heart.

Put it outside to dry for a while. Depending on how hot it is in your part of the world, drying might take some time.

After it’s dry to the touch bring it back in. Use your piping bag to make a bunch of icing swirls on either side of the first line you made.

You should now pipe the top line of icing swirls on top of the first line you made. It should form a nice little dome ^_^ I forgot to take a photo of that step sorry! Make sure the icing covers all of the wires.

Now let the whole thing dry! It was quite cold when I did mine so I left it for a day then I turned it over and let the back dry for another day.

This is the back:

Once you are completely sure it’s dry gather the rest of your materials.

Cut a length of ribbon for it to hang on.

And hot glue it to the back of the heart. Make sure you do it in a way that’s not visible from the front.

And there you have it! It’s a gigantic whipped cream heart ^_^

To attach earrings just hook/pin them through the holes in the tulle. I made the ribbon hanger longer to make it easy to access the back of studs.

Here’s a close up of all the cream. Because it’s made from modelling paste it should be very hard, be careful because the tips of the cream are pointy!

And so the cycle of sweets themed storage continues My next sweets storage is going to be candy cane themed, any guesses to what it is?

Hope you enjoyed!

Cancan hats are another trend that seems to be everywhere right now. Of course they’ve been around for practically forever with various names… straw boater, basher, skimmer, katie, senni etc. Here in Aus they are actually part of a lot of private school uniforms. I’ve always loved them because the remind me of picnics in the park with a nice cup of tea!

Anyway whatever you call it what I’m talking about is this:

Image courtesy of google, full credit to the owner.

Because they’re popular now they are quite expensive. So I decided to DIY my own ^_^

What you need:

• Round top straw sun hat
• Scissors
• Needle and thread
• Glue Gun
• Ribbon and lace for decoration if your hat isn’t decorated already.

You can easily pick up a big wide brim rounded straw sun hat for $2 from a thrift store and if you check out junk stores you can probably find one new for not much more than that! I happened to have one from back in my Country Lolita days that I had decorated with ribbon and lace but I’ve never actually worn it because the shape looked silly on me… time to make it all flat and pretty

Ok let’s get started!

At the top of the hat you will notice that the whole thing is made of a big spiral of straw which it stitches together. Carefully wedge your scissors into the top of the spiral and cut a few of the stitches.

Gently pull it apart, continue cutting stitches if you need to.

Start unraveling the sprial and cutting the stitches as you go ^_^

Keep going until you get to around this point:

When you get to here there are two options depending on the type of hat you started with. Some of these sun hats have very straight sides and some of them are basically a gigantic dome.

If you’re lucky enough to have one with straight sides then you can skip the next few steps.

If you have one with curved sides (like me) you will need to continue unraveling the hat until you to get to a point where the part that’s left is completely straight. This point might be different for you hat but mine was just above the ribbon band here:

Now you should get your needle ready and thread it.

Ok now it’s time to put it back together so the sides are straight and the top is flat!

Because the straw has been in a curved position for so long you will most likely need to bend it straight before you put it back together. Make sure to be gentle when you do this so you don’t damage it. I straightened it by putting it flat on the floor and gently bending it the other way.

Now you need to start winding the straw back into place. You can either do it the right way and stitch it in place or the quick way and hot glue it in place. Either way secure it as you go around.

You can see that the way I’ve put it back in place is much more vertical than the original pattern.

Keep going until you think your hat is tall enough and then do one more rotation around the top to make sure it is flat enough for the top of the hat not to be on an angle!

When you’re finished you should cut the excess straw off and secure the ends. I am going to cover the straw end with more decoration at the end so it doesn’t show.

Now let’s make the top! Get your left over straw and arrange it on a flat surface in a spiral.

You should measure the spiral to make sure it fits the top of your hat exactly and pin it in place.

Now stitch or glue your top in place.

Continue until it is the right shape and diameter. You should stitch the end of the straw around so it forms a circle like this:

Cut off the excess and this is what you get:

Do make sure that it fits the top of the hat before you cut the ends so you don’t have a gaping hole in your hat!

At this point I cut off the elastic string which holds the hat on your head because it was pointless and in the way.

Now on the inside of your hat, glue/stitch the top in place

You should get something like this:

Hurray it has a flat top!!

Now we’ve made the top shorter and flatter the large brim looks a bit silly! So let’s make it shorter

Find the edge and snip the stitches. It should come apart very easily.

I pulled out maybe 3 or 4 rows of it. Now secure the edge back in place.

And you get this…

Last step is decoration! I wanted a nice big rosette style thing on my hat so I cut off the long tulle tail…

And added another one of top. This also covers the join around the hat. Again hot glue or sewing is fine here.

TAADAA!

And there you have it, an adorable cancan hat that cost me nothing And I have another cute hat to add to my arsenal of bad-hair-day-hiding-tools

What do you guys think?

A few months ago a reader wrote in and asked me to write a “T-shirt Surgery” tutorial. If you haven’t head of t-shirt surgery it’s basically when you take a plain old t-shirt and you make it into something cooler and more fashionable. There is a community for it here where you can see some fantastic examples.

So anyway when I got the request I didn’t think it was something I would do because I don’t wear t-shirts often… but it stayed in my mind for ages and I kept thinking about it more and more until I had an idea When we were in Singapore for the Nuffnang Awards, Nuffnang Australia was lovely enough to give us all shirts. Mine had the slogan “I’m famous (in the blogosphere)” hahaha! I thought it was awesome but they only had large sizes so since then I’ve used it to sleep in… but no more!

So let’s get started in turning this….

Into this….

What you need:

• Large shirt (I’m using my Nuffnang one)
• Other shirt in a cute colour. I’m using an old pink Emily the Strange shirt
• Needle and thread
• Thin elastic
• Flowers or decoration
• Scissors
• Overlocker or sewing machine
• Shirt that actually fits you (for measuring)

Please note that I am hand stitching almost everything here because my sewing machine has been packed up for the move, if given the choice I would definitely use a machine for this project. I am going to redo the stitching when we get to the new house

First turn your white shirt inside out. Lay your white tee on a flat surface and place the shirt that fits you over the top. Line up the shoulder seams to make sure it’s in the right place.

Cut the bottom off in line with your nice shirt.

Cut up the side seems around 1.5cm away from your nice shirt’s seam, this is to give it enough room for the new seam we’re going to sew. You will notice when you’re cutting that the seam is probably not a straight line but instead it curves slightly. This curve will give the waist some shape so if you want to adjust this now is the time!

Cut until you reach just below the sleeves.

Following the line of the sleeves cut around at an angle. Now it just looks like a longer sleeve ^_^

Fold the shirt in half and repeat on the other side.

So this is what you should end up with… it pretty much just looks like a smaller shirt now ^_^

Now let’s cut a new neckline! Turn it the right way out so you can see what you’re working on. I chose a square neckline so I could show up pretty necklaces. I started by cutting out the collar carefully and then kept cutting until I reached the neckline I wanted.

Now get your coloured shirt and lay it out…

Cut the back section from the shirt, you want to remove all of the seams. You will end up with something this shape.

Lay the pink version over the white shirt. You should cut the sides and the neckline to match the white shirt. The pink part should be on the same side as the writing/pattern you want on the front of the shirt. You’ll end up with this:

Now you should use your overlocker (or sewing machine) to stitch up the sides. Start from the bottom and sew towards the sleeves, continue until there’s no hole left ^_^

Now at the top where the straps of the pink part are, there should be a strip of interfacing on the white shirt. Sew the pink to the white. Most shirts have it but if yours doesn’t just sew it into whatever seam is there.

You end up with this (although mine is terribly hand stitched).

Now move over to the sleeves, cut around 4cm off the ends. Repeat on the other side.

Measure a piece of thin elastic around the top of your arm and cut in two.

Sew the elastic around 4cm from the edge of the sleeve. While you sew stretch it to the correct size so when it’s unstretched it will form a ruffle. Mine looks a bit dodgy because it’s hand stitched >_<

So how you have something like this

Turn your shirt the right way out now and fold it in half down the middle with the pattern facing out. This next part is all about measuring. From the bottom of your pattern (my pattern is the slogan on the front) fold the shirt in 3 sections. Place a small marker at each fold.

Flatten the shirt out again but keep it folded in half. The pink strip below is marking how far in were going to cut, it should be as far in as the markers are apart. It’s a little hard to explain but it should kind of form a square.

Now do the actual cutting! DO NOT CUT THE PINK FABRIC! Only cut the white.

Repeat on the other side so you end up with this:

Now we’re going to make the sections into little bows

Cut 3 strips of the hem of the pink shirt.

Fold them in half and use them to form the center of the bow. Sew it all in place like this:

On the bottom bow place a small holding stitch through the white and pink so the bottom bow will keep it’s shape.

Now let’s go back to the neckline! Cut the rest of the hem off the pink shirt and measure it out like this:

Sew along the seams that are already there. Do the sides first and continue around the back.

Add a final piece to the front and cover the edges ^_^

I decided to add some chiffon flowers to the neckline just to girly it up some more. I’m going to add more as soon as I can unpack my craft supplies and dig them out

And so there you have it! Finished and much more my taste than the original

And of course it’s time to try it on!

Close up of the bows…

Mwahaha and no I’m not conceited enough to think I’m *actually* famous in the blogosphere, it’s just meant to be cute and funny

Well there you go, my first attempt at t-shirt surgery and I’m pretty happy with the results! So much so that I’m going to wear it tomorrow to the going away party that Nuffnang is throwing James and I I even made a little matching surprise but you’ll have to wait for the event to see! What do you all think?